The iMAX-8000H is a high-reliability, high-performance, and large-capacity wireless metropolitan area network (WMAN) private network access system, delivering up to 600Mbps wireless transmission rate per sector with communication distances spanning tens of kilometers. Featuring outdoor ultra-long-range connectivity, low latency, high bandwidth, and exceptional reliability, the iMAX-8000H also supports comprehensive metropolitan area network (MAN) technologies including fiber optic access, routing, and firewall capabilities. These advanced functionalities ensure enhanced security and reliability in network configurations, making it an ideal solution for edge access in wireless IP private network deployments.
Product Technical Features and Advantages:
- High Bandwidth: The transmission rate of each sector of the base station can reach up to 600Mbps. The bandwidth of a single base station is 600Mbps×N (multi-base station superposition). Both the base station and the user terminal can be customized as single-mode or dual-mode.
- Transmission Distance: Under line-of-sight conditions, the coverage radius of point-to-multipoint networking can reach up to 30 kilometers at the farthest (even the smallest integrated antenna user terminal CPE device can meet the communication needs within 10 kilometers; the CPE device with the LNT model integrated high-gain antenna can meet the communication needs within 20 kilometers). The farthest point-to-point transmission distance can reach 50 kilometers.
- Operating Frequency: It supports the ultra-wide frequency band of the entire 5GHz frequency band (4.9-6.0GHz) and is software adjustable. The typical operating frequencies are 5.8GHz & 5.2GHz.
- Advanced Wireless Technology: Based on the advanced wireless interface of MIMO (Multiple-Input Multiple-Output), antenna diversity, and OFDM (Orthogonal Frequency Division Multiplexing) technology, it truly supports NLOS (Non-Line-of-Sight) transmission.
- Duplex Technology: TDD (Time Division Duplex), 2x2MIMO-OFDM (BPSK/QPSK/16QAM/64QAM).
- Single-mode or Dual-mode: Both the base station and the user terminal are divided into single-mode or dual-mode. The single-mode has 2 radio frequency ports, and the dual-mode has 4 radio frequency ports, which can be connected to multiple antennas to meet the communication needs of different scenarios.
- Bandwidth Allocation: Asymmetric throughput adaptability, dynamically allocated between the uplink and downlink.
- Wireless Power: High transmit power, reaching 27dBm.
- Channel Bandwidth: It supports channel bandwidths of 10/20/40/80MHz, which are dynamically adjustable.
- Wireless Intelligence: Automatic Distance Learning (ADI), Adaptive Rate (AAR), and Automatic Channel Selection (ACS).
- Networking Mode: It supports various metropolitan area network networking modes such as point-to-multipoint, point-to-point, MESH, hot standby, and ring network. And the user terminal can act as a relay in PTP mode, making the system design and deployment very convenient.
- Multiple User Terminals Available: User terminal CPEs with different rates of 150/300/600Mbps are available. Integrated antennas and external antennas, as well as single-mode/dual-mode wireless user terminal CPEs, can all be customized.
- Hot Standby and Roaming: The system supports multiple hot standby and roaming modes such as RSTP, MESH, and VRRP. Through the VRRP technology, multiple functions such as redundant hot standby, smooth roaming, and link bandwidth superposition can be achieved.
- Antenna Selection: For the base station unit BS, a 120-degree dual-polarized sector antenna or a 360-degree omnidirectional antenna is recommended. For the user unit CPE, an integrated antenna (a conventional 18dBi dual-polarized antenna, and a 23dBi dual-polarized antenna needs to be customized by placing an order) is recommended. Or, according to the needs, an external antenna can be used. Various antennas such as omnidirectional antennas, parabolic antennas, and flat-panel antennas can all be customized.
- Network Interface: The base station BS is equipped with a Fiber DC-IDU optical port indoor unit as standard, which can provide a 2-core SC optical fiber standard interface. The optical transmission distance when connected to a single-mode optical fiber is ≥20 kilometers, and it can provide 3 10/100/1000Base-T Ethernet interfaces externally.
- Support for IPv6: It supports IPv6 address allocation, and both the bridging mode and the routing mode are available.
- Routing and Hot Standby: It supports multiple routing modes such as static routing/RIPv2/OSPFv2/BGP, etc., and can build a highly reliable ring network and plan a complex metropolitan area network; it supports the VRRP virtual hot standby routing protocol, which is suitable for the construction of highly reliable networks such as ring networks and hot standby, as well as fast service roaming; it supports the OSPFv3 routing technology and can plan routes based on IPv6.
- Other Network Technologies: It supports network technologies such as DHCP, DNS, and NAT; it supports multiple tunnel communication protocols such as PPTP, L2TP, Open VPN, SSTP, IPSec, EoIP, and GRE.
- Multi-service Hybrid Networking: It supports multiple QoS (Quality of Service) and bandwidth allocation mechanisms, and the audio and video transmission is stable.
- Security: The air interface adopts the private iMAX wireless network communication technology. The wireless link supports wireless packetization, MAC address filtering, and AES 128-bit dynamic advanced encrypted data transmission. The network technology supports multiple security technologies such as VLAN (Virtual Local Area Network), VPN (Virtual Private Network), anti-DoS attack, and Firewall software firewall, and supports multiple tunnel communication protocols.
- Reliability: It supports MESH architecture networking; it supports RSTP link backup; it supports ring network routing mode networking; it supports VRRP virtual hot standby routing high-reliability technology; it supports the data mirroring technology to send data simultaneously on multiple channels, which can ensure the reliable transmission of sensitive information.
- Low Latency & Packet Loss Rate: Millisecond-level delay. By using the data mirroring technology, the packet loss rate can be equal to 0%.
- Clock Synchronization: It supports the NTP protocol and can achieve the clock synchronization function.
- Power Supply: DC48V/AC220V is optional. It has ultra-low power consumption. The average power consumption of BS (single-mode) is ≤18W, and the average power consumption of CPE is ≤12W.
- Excellent Environmental Adaptability: It complies with the industrial design outdoor IP68 standard and can work stably and reliably in harsh environments (wind, frost, rain, and snow), extreme temperatures, or high-corrosion conditions along the coast. The temperature and humidity indicators of ODU are: -50℃ to +85℃, humidity 100%, condensation; Fiber DC-IDU complies with the industrial wide temperature indicator of -40℃ to +85℃, and the rail installation is simpler.
- Convenience of Installation and Maintenance: The equipment is small in size and light in weight. It uses a low-cost baseband cable (Category 5e outdoor shielded twisted pair) to connect the equipment, which is convenient and simple to install and has a short construction period; it has built-in practical tools such as a spectrum scanner viewer and ping, and has an LED signal strength indicator, which is convenient for aligning the antenna.
- Network Management Features: It provides free WEB management or network management software, which is easy to operate and maintain; it can be remotely managed and wirelessly upgraded; it supports centralized management and can be integrated into a network management system that supports third-party SNMP for unified management.
Product Model:
Base Station BS: Client-side CPE:
iMAX-8000H-BS300/600-ENT iMAX-8000H-CPE150/300/600-ENT/INT/LNT
iMAX-8000H-BS300/600M2 iMAX-8000H-CPE150/300/600M2
Explanation: In the model designation, BS represents the base station, and CPE represents the user terminal. The numbers indicate the air interface bandwidth of the system. The wireless module is represented by M. For the single-mode, there is no additional identifier, and for the dual-mode, it is M2, and so on. ENT represents the model with an external antenna, INT represents the model with an integrated antenna, and LNT represents the model with an integrated ultra-high gain antenna.
Typical Applications：
- Government and enterprise users
The iMAX-8000H system provides dedicated wireless broadband network infrastructure for government departments and enterprise networks. These facilities can significantly reduce the total construction cost and obtain a highly reliable and secure network when implementing the following applications:
Ø Networking of large-capacity high-definition video surveillance.
Ø Networking of dedicated networks for large-scale enterprises and institutions.
Ø Outdoor long-distance and large-capacity IP network connection applications.
Ø Establishment of highly reliable and secure wireless metropolitan area networks.
Ø Establishment of mobile communication private networks such as ship networking, vehicle networking, heavy machine networking, and unmanned aerial vehicle (UAV) networking.
Ø Establishment of private networks for remote control or unmanned driving of mobile points such as ships, vehicles, heavy machines, and UAVs. - Telecom Operators and ISPs (Internet Service Providers)
For operators and Internet service providers (ISPs) that provide high-capacity broadband access services to end-users, the iMAX-8000H access system is an excellent revenue growth point. Operators can incorporate the high-capacity function of the iMAX-8000H system into both wireless and wired backhaul access systems, such as Wi-Fi hotspots, cellular base stations, and DSLAMs (Digital Subscriber Line Access Multiplexers).
